ANSI/ASME B16.9 BUTT-WELDING FITTINGS Daidai Tee/Rage Tee

ANSI/ASME B16.9 misali ne wanda ke rufe kayan aikin buttwelding na masana'anta a cikin masu girma dabam NPS 1/2 ta NPS 48 (DN 15 ta DN 1200). Ɗayan nau'ikan kayan aikin walda na yau da kullun da aka rufe a cikin wannan ma'auni shine Daidaitaccen Tee da Rage Tee. Anan gabatarwa ga ANSI/ASME B16.9 kayan aikin walda don Daidaitaccen Tee da Rage Tee:

 

1. Daidaitaccen Tee:

- Equal Tee wani nau'i ne na kayan aikin walda wanda ke da buɗaɗɗe masu girman gaske guda uku don reshe bututu zuwa kwatance biyu a kusurwar digiri 90.

- ANSI/ASME B16.9 yana ƙayyade ma'auni, haƙuri, buƙatun abu, da ka'idojin gwaji don Daidaitaccen Tees.

- Ana amfani da Tees masu daidai da ko'ina a cikin tsarin bututu don rarraba kwararar ruwa daidai gwargwado a cikin kwatance daban-daban, samar da daidaitaccen rarraba kwararar ruwa.

 

2. Rage Tee:

- Rage Tee wani nau'in kayan aiki ne na butt-welding wanda ke da buɗaɗɗa ɗaya ya fi na sauran biyu girma, yana ba da damar haɗin bututu masu girma dabam a cikin haɗin reshe.

- ANSI / ASME B16.9 yana bayyana ma'auni, ƙayyadaddun kayan aiki, da bukatun masana'antu don Rage Tees.

- Ana amfani da Rage Tees lokacin da ake buƙatar haɗa bututu masu girma dabam ko yawan kwarara a cikin tsarin bututu.

 

3. Daidaitaccen Biyayya:

- ANSI/ASME B16.9 butt-welding fittings sun dace da Cibiyar Matsayin Ƙasa ta Amirka (ANSI) da Ƙungiyoyin Injin Injiniya na Amirka (ASME) don kayan aikin bututu.

- An tsara waɗannan kayan aikin don amfani da su a aikace-aikacen masana'antu daban-daban, gami da mai da iskar gas, petrochemical, samar da wutar lantarki, da masana'antar sarrafa ruwa.

 

4. Kaya da Gina:

- ANSI/ASME B16.9 butt-welding fittings for Equal Tee da Reducing Tee suna samuwa a cikin abubuwa daban-daban kamar carbon karfe, bakin karfe, da gami karfe don dacewa da aikace-aikace daban-daban.

- Za'a iya kera kayan aikin ta amfani da hanyoyin gini maras sumul ko welded, dangane da buƙatun kayan, girman, da matsi.

 

5. Shigarwa da walda:

- ANSI/ASME B16.9 Daidaitaccen Tee da Rage kayan aikin Tee an tsara su don shigar da walda, yana tabbatar da haɗin gwiwa mai ƙarfi da mara ƙarfi tsakanin bututu.

- Ayyukan walda da suka dace, gami da shirye-shirye, daidaitawa, da dabarun walda, yakamata a bi su don cimma ingantaccen haɗin gwiwa.

 

A taƙaice, ANSI/ASME B16.9 kayan aikin walda don Daidaitaccen Tee da Rage Tee suna taka muhimmiyar rawa a tsarin bututu ta hanyar ba da damar reshe da haɗa bututun cikin aminci da inganci. Wadannan kayan aikin an ƙera su don saduwa da ka'idodin masana'antu da ƙayyadaddun bayanai, suna ba da ingantaccen rarraba kwararar ruwa da hanyoyin haɗin kai a cikin aikace-aikacen masana'antu daban-daban.